金牛集团郑州勘察机械有限公司(原郑州勘察机械厂)

    Gold-Ox Group zhengzhou Exploration Machinery Co.,Ltd.

产品之一：全液压转盘式钻孔机
Pan-Hyclraulic Turntable Drill Rig
型号：KP3500型 产品分类：桩工机械 商标：斗牛
产品简述：该机是由转盘带动钻具旋转钻进的回转钻机。采用全液压驱动，恒功率回路，分泵启动，油缸升降，电液复合操纵，钢轮行走，解体运输。该机可采用正反循环和空气反循环等钻进工艺施工，适合于各种地层，是江河大型桥梁基础施工的理想设备。九六年获国家级新产品奖。
Cutting tools of the rig are driven by a turn table. It is featured in pan hydraulic drive, cons tant-power back circuit. Separate pomp start cylinder up/down, electric and hydraulic operation, wheel walk and segment transport, Processes like right/reverse circulation are available and suitable for various strata. It is an ideal equipment for constructing large river bridges. The rig was asarded " National Naw Product" prize in 1996.
产品尺寸：5.9(L) 4.8(W) 9(H) 重量：47T

产品之二：大直径灌注桩钻孔机 
Large-diameter Piling Drill Rig
型号：QJ250-1型 产品分类：桩工机械 商标：斗牛
产品简述：该机是适合于多种地质条件的大直径桥梁钻孔。可采用正反循环和空气反循环钻进工艺施工。配有两个60T五轮滑车在桩架上左右移动；底盘配有钢轮，可在道轨上纵横移动，上底盘可纵向移动，让开孔口钻头直接入孔。八五年获建设部科技进步一等奖。
The rig can work in various geological. Conditions for large-diameter bridge piles; both right/reverse circulation and air reverse circulation are available. Two 5-pulley trip black(60T each)are incorporated in the frame. The chassis, with its wheels, can move in for directions on rails. The apper chassis can move for ward /backward to make room for bore, so the bit san be directly pot in The product was awarded first prize of science innovation by Constraction Minstry in 1985.

产品之三：深孔长螺旋钻孔机
Deep CFA Drill rig
型号：SZKL600B 产品分类：桩工机械 商标：斗牛
产品简介：该机是适应于工业与民用建筑桩基础施工的步履式螺旋钻机。底盘全液压.步履式行走，360度全回转，行星变速动力头，除可进行一般长螺旋施工外，还可进行注浆施工和超流态施工工法。施工中无震动.低噪音.施工无污染，成孔效率高是其主要特点。
英文同"液压步履式钻机 AKL800BB"
产品尺寸：12（L）5（W）28（H） 重量41T 包装尺寸：10.5(L) 3(W)3.1(H) 包装 20T

产品之四：液压步履式螺旋钻孔机
Walking-Frame Hydraulic Rotary Drill Rig 
型号：AKL800BB 产品分类：桩工机械 （Piling Machinery）
简述：该机是适应于工业与民用建筑桩基础施工的步履式螺旋钻机。底盘全液压.步履式行走，360度全回转，行星变速动力头，除可进行一般长螺旋施工外，还可进行注浆施工和超流态施工工法。施工中无震动.低噪音.施工无污染，成孔效率高是其主要特点。
It is a walking-frame rotary drill rig, suitable for industrial and civil piling construction. Hydraulic chassis of the product can walk and turn 360 degrees. with the planetary.-gearal rotary head rotary head, the rig can not only be used for CFA drilling, but also for CFG piling and injection construction process. It is mainly highlighted in no vibration, low noise, no pollution and high efficiency.
产品尺寸：8.5（L）4.6（W）22.5（H） 重量：24.5T
包装尺寸：13.3（L）3（W） 3.6（H） 包装重量：18T

产品之五：工程钻机 Engineering Drill Rig
型号：KP2000A 产品分类：桩工机械 商标：斗牛
简述：该机是适应于桥梁及建筑基础施工的转盘式回转钻机。以电机为动力，机械传动，部分液压驱动，双层底盘，底经2M以内的钻头可直接入孔。可采用正反循环钻进，根据施工要求，亦可在撬装.钢轮.滚杠三种形式中任意选取。
It is a rotary drill rig for constructing piles of bridges and buildings. Powered by an electric engine, the rig applies mechanic transmission, partial hydraulic drive and double chassis. Bits with diameter zip to 2m can directly be paced in .Orilling work can employ either right or reverse circulation. A free choise be twecn crowbar, steel wheel and rolling log is available according to construction requirements.
产品重量：10T

产品之六：水文水井钻机 Hydro-well Drill Rig 
型号：S600 商标：斗牛 Douniu
简介：该机适应于水源勘察.工业.农业.民用水井的钻探和成井施工及底下坑道通风孔钻凿和基础桩孔施工。该机为全拖挂式机械传动，部分液压操纵，整体钻塔，液压起降。
It is capable of drilling wells for prospecting water resources, or for industrial, agricultural and civil purposes. On the other hand, it can be used to construct pilings or ventilation holes for under ground galleries. The machine is feectured in trail transport, mechanic transmission, partial hydraulic operation, in tegral drill touver and hydraulic erection/lowering.
产品尺寸：5.65（L）4.15（W）16.7（H） 重量：10T
包装尺寸：10（L）2.8(W) 4.1(H)

金牛集团郑州勘察机械有限公司
Gold-Ox Group zhengzhou Exploration Machinery Co.,Ltd.
联系人： 魏诗军 Wei Shijun
公司注册资金：908.5 单位：万元（人民币） 公司规模人数：657
区号：0371 电话：7437525 公司网址：http://zzkcjx.com
区号：0371 电话：7449776 电子邮件：jnkj@public2.zz.ha.cn